Circontrol eHome
CARPLUG by Circontrol eHome charging station - 7.4kW adjustable - 32A with attached cable 5m type 2 for home and business parking
The Wallbox CARPLUG by Circontrol ehome - 1.4kW to 7.4kW adjustable is connected in single phase 230V VAC +/- 10%.
The power of the terminal is adjustable using a potentiometer ranging from 6A to 32A.
The Plug'n'Charge charging mode allows you to start charging simply by plugging the type 2 plug of the terminal into your vehicle. There are no identification constraints.
The Led bar present on the front of the terminal, allows you to know the status of the terminal (eg: broken down, functional etc ... ) but the state of charge , blinking blue led means charging in progress, steady blue led means charging is complete.
The casing of the bollard is made of ABS plastic, which gives it robustness and UV resistance . This terminal can therefore be installed indoors as well as outdoors. The eHome charging station from CARPLUG is not afraid of extreme weather conditions.
Its design is thought to allow you to wrap the cable around the terminal when you are not using it. This is to avoid damaging the type 2 charging socket .
You can also choose an optional cable support, more practical with its automatic hanging system.
It offers a 5m attached cable with a type 2 plug to ensure safe charging of your electric vehicle in mode 3.
Shipping
It depends on where you are. Orders processed will take 5-10 business days to arrive.
Thanks to its compact design easily removable , installation can easily be done in less than an hour by a professional.
It has two entries for the power cable, one from the back of the terminal, for installation without visible power cable and another entry from below the terminal.
- Attached cable 5m type 2
- Maximum power 7.4kW
- Connection single phase 32A 230 VAC +/- 10%
- Protection IP54 and IK10 : resistant to water splashes
- Attached cable 5m type 2
- Wall mounting kit included
- Power adjustment via button on the charging station
- Size: L180 x H315 x P115 mm
- Weight: 4Kg
Thanks to the internal potentiometer, you can easily adjust the maximum power of your eHome wallbox
Electrical protections are mandatory in France, and must be installed on a dedicated line.
They have been validated in compliance with the IRVE decree January 2017, the French regulations in force.
Here are the protections to install:
- A 40A Type A 30mA differential switch (ex: HAGER BDH240F ) - not included
- A 40A C curve circuit breaker (ex: HAGER MJT740 ) - not included
Thanks to its compact design easily removable , installation can easily be done in less than an hour by a professional.
It has two entries for the power cable, one from the back of the terminal, for installation without visible power cable and another entry from below the terminal.
- Attached cable 5m type 2
- Maximum power 7.4kW
- Connection single phase 32A 230 VAC +/- 10%
- Protection IP54 and IK10 : resistant to water splashes
- Attached cable 5m type 2
- Wall mounting kit included
- Power adjustment via button on the charging station
- Size: L180 x H315 x P115 mm
- Weight: 4Kg
Thanks to the internal potentiometer, you can easily adjust the maximum power of your eHome wallbox
Electrical protections are mandatory in France, and must be installed on a dedicated line.
They have been validated in compliance with the IRVE decree January 2017, the French regulations in force.
Here are the protections to install:
- A 40A Type A 30mA differential switch (ex: HAGER BDH240F ) - not included
- A 40A C curve circuit breaker (ex: HAGER MJT740 ) - not included